I took the brake arm from a coaster brake hub that we disassembled for a cargo bed and bent it in the vice put a 3/8″ hole in it and dropped a bolt through it. Done. Simple and effective. The rod end joint is about $6.00, available and salvageable if you have an ATV shop near by. This is just bolted in to the handle of the tongue of the trailer in such a way as to allow it to rotate freely.

This prototype is complete.  We have several trailers started that will be ready for delivery in the coming weeks. We will continue development of the trailers for the next couple months. While building the first 2 requested carts. One will be for Stewart, a mobile bike shop of course, and the other for a local urban farmer, as a farm to market cart.

The hitch

The simplest of hitches a brake arm and a rod end bearing

[slideshow]

We’re rolling now. We spent the last couple work days getting frame elements ready to assemble on a volunteer day Wednesday. We should have 2 carts for demos and 2 for sale this Saturday at the Marmots’ Meander 2012   event. We are now taking orders for standard and customized trailers. Contact Jim at OCBC or Bart to discuss the details and place your order. All orders will be filled on a first come first serve basis.

First test of cart on bike

This is the first test of the front fork model hitched to a bike. I put 40 lbs of weights and a bunch of frame parts in the tub and rode it around on the cobble stone road next to OCBC took it over the curbs etc. It worked real well the tongue of the trailer allowed you to turn the bike in both directions as sharply as you could safely turn if the trailer wasn’t there. It seemed to add a bit of stability to the bike. I could feel the load on the rough rode but it wasn’t jerky or bouncy or anything. We will be doing more test rides over the next few days.

This design is coming together quickly. We tested this prototype out by having someone 175 lbs or so stand on platform. Next week we will fit this prototype with a hitch and start doing on the road tests. This model will have a recommended payload capacity of 200 lbs but will probably handle more weight than that.

This model will be available within a couple weeks, and will retail for about $200.00 to start. Orders are being taken on a first come first serve basis. Contact OCBC to place order or discuss special uses and customization.